n data


	Customer Service We make the components that make your product or process work better

	SCProbond™ C Composite Bonded Silicon Carbide (High Temperatures - Thin Walled Cross Sections Fine Grain, Higher Strength)

	SCProbond™ N Nitride Bonded Silicon Carbide (Wear Resistance - Limited High Temperatures)


	SCP’s Online Quoting Request a “Quick Quote” from SCP using our convenient online Inquiry Forms.


	FAQ’s


	View all articles.

SCProbond™ N
Typical Applications

Cyclone Apexes
Vortex Finders
Inlet Heads
Transitions
Liners
Chutes
Wear Blocks
Burner Barrel Liners
Pump Components
Impellers
Nozzles
Chokes

SCP can produce components up to 24" (610mm)x 40" (1016mm) x 48" (1220mm) in size. Our manufacturing forming method is casting, enabling us to produce complex geometries without expensive machining operations. Standard manufacturing tolerances are +/- 0.040" (+/-1.0mm) or +/-0.5%, whichever is greater. Non-uniform wall thickness capable from 0.300" to 3.000+"

Physical Property Data
	Units	Value
*Bulk Density*	g/cc lb/ft^3	2.60-2.70 162-169
*Apparent Porosity*	%	16
*Modulus of Rupture*	MPa psi	65.5 9,500
*Coefficient of Linear Thermal Expansion*	x10^-6/Deg.C x10^-6/Deg.F	4.9 2.7
*Thermal Conductivity*	W/m Deg.K	18
*Maximum Safe Operating Temperature*	Deg.C Deg.F	1525 2777
Typical Chemical Analysis
*Component*	*Content (%)*
SiC	71.5
Si₃N₄	20.0
SiO₂	3.0
Si₂ON₂	<1.5
Fe₂O₃	0.25
Al₂O₃	<6.0


	Note: This information is for your consideration and verification and should not be considered a warranty or representation for which we assume legal responsibility.


	Parameters